Study: My Understanding of

The Benefits of Aluminum Wheelchair Ramps

For disabled people, getting around and climbing up stairs is very challenging. And so, there are lots of wheelchairs ramps that are accessible in several varied sizes or lengths to enable a person in wheelchair to get around quite easily. To learn about these wheelchair ramps, read more here.

Disabled individuals basically would like get around as normally as they can, but they cannot do so without assistance from other people or things. They require wheelchairs ramps to help them get in as well as out.

The aluminum handicap ramp is an all-around system compared to all the rest of the ramp systems. A welded aluminum structure is lighter, but it is stronger as well as more durable, when compared to wood. Aluminum wheelchair ramp systems can be taken apart and used again at other locations, plus they can be fitted into nearly all configurations. The aluminum surface practically requires no maintenance at all. Installation is immediate and can be carried out without any building permit because it may be considered an impermanent structure. An aluminum ramp is your most superior choice, plus it is maintenance along and also needs very few tools to install. Installation can be completed in less than an hour, especially for a 24-inches ramp.

The installation of aluminum ramps can be fixed or temporary, and they can as well be reconfigured and transferred. At the same time, if you are located somewhere there’s snow or salt, it is not going to damage the aluminum ramps as it would a wood ramp.

With the many different ramps that the market has to offer, a disabled person will be able to negotiate steps as well as get easily across any doorway height. Also, it helps them when loading as well as unloading wheelchairs from their vehicles.

The ADA regulations for wheelchair ramp installation
According to ADA regulations, a wheelchair ramp must be 1 foot for every rise of 1 inch. There is no exception, aside from when there are restrictions in space. For instance, if the porch has 24-inches of total rise in steps, the required ramping would be 24-feet. A ramp that is measures beyond 30 feet is required to be fitted with a transitional resting platform. It can either be a straight platform or else a turn platform. The platform should have a length of 60 inches, at least, and of the same width as its ramp. The minimum measurement of any platform that shifts direction must 60 inches x 60 inches. All wheelchair ramps with a rise beyond 6 inches must have handrails as well as ramps which are longer that than six feet. Handrails must be installed on the two sides of the ramps with unbroken rails on switchback together with dogleg platforms.

If you need help with wheelchair installation, get in touch with National Ramp.